Choose from four brewing options that best fits your needs: Fast, regular bold or over ice.
Select your keep warm temperature low, medium or high for extra hot coffee up to 4 hours.
Thanks to the QuickDrip System, you can get your coffee up to 20% faster*.
Stainless steel accented, uniquely designed carafe ensures coffee stays warmer for longer.
Every Braun coffee maker features the OptiBrewSystem for outstanding coffee taste and aroma. This Braun coffee technology delivers maximum flavour by optimizing temperature, brewing time and extraction. Enjoy a perfectly balanced cup of coffee – time after time
For intense coffee with a plain taste - not watered down - thanks to a dedicated brewing process.
When the "CLEAN" icon is lit, it indicates it is time to descale the machine.
Remove the filter basket and the water filter.
Fill the water tank with 7 cups of fresh water, pour in the descaling solution (3.4 oz / 100 mL), turn the dial to "BREW", and press the "CLEAN" button.
The "CLEAN" icon will start to flash indicating the descaling process has started.
After 15 minutes the "CLEAN" light will start flashing faster.
Then, empty the carafe and refill will 14 cups of fresh water, pour into the water tank of the machine, and press "SET" to start the rinsing process.
After descale and rinsing is completed, it is suggested to run two full brewing cycles of fresh water without coffee to completely remove any residual solution.
To make an over ice drink you need to use double the coffee grounds than you normally use.
Fill the unit with 7 cups of water and fill the carafe with ice cubes to the marking on the carafe.
Turn ON the unit and turn the dial to "Brew" than press the "Over Ice" button and select "Fast".
The amount of water, coffee grounds, and ice cube could be adjusted based on your taste.
Keep in mind the ice cube will melt so do not overfill the unit with too much water.
Never add ice cubes inside the water tank of the machine.
The acoustic signal will indicate when the brewing cycle is finished. If you hear it before the unit is finished, it may mean there is calcium build up in the unit and it requires to be descaled.
To set the clock make sure the unit is ON.
Hold the "CLOCK" button for 5 seconds and then press the "SET" button, the hours will flash.
Use the "SET" button to choose the right hour;
Press "OK"to confirm and now the minutes will start flashing, use the "SET" button to choose the right minutes and then press "OK" to confirm.
The clock is set.
The keep warming temperature has three different settings: HIGH, MED, and LOW.
To change the temperature, make sure the unit is ON. Turn the dial to "TEMP", the three settings will start to flash.
Use the "SET" button to select the desired settings.
The default setting is set to Medium.
If your unit is displaying E01, E02, or E03 error codes , unit needs to be repaired, please contact our Braun call center at 1 (888) 977-3578. Our representatives are available: 9:00 am – 8:00 pm (ET) Monday through Friday and Saturday 9:00 am – 5:00 pm (ET).
Bazaarvoice SAP Hybris Integration Version 2.8.2