Question 1

Can I add any additives/ descalers/ starch/ scented ironing water into the water tank of my iron?

Accepted Answer

Additives/descalers/starch/scented water should not be used at all, to avoid serious damage to your steam iron.

Question 2

Can I use condensation water or distilled water from my tumble dryer?

Accepted Answer

No, this condensation water could have remnants of soap and other residues.This can damage the iron. In general, please use just tap water, and only in case of very hard water, add 50%of distilledwater.

Question 3

For which types of garment should I use the Soft Textile Protector?

Accepted Answer

Soft Textile Protector is ideal for silk and black garments. It will protect these types of garment from shiny patches.

Question 4

How can I clean my steam iron soleplate?

Accepted Answer

Braun steam irons with Eloxal or Saphir soleplate can easily be cleaned with steel wool.

Question 5

How can I decalcify the iron?

Accepted Answer

In order to clean the steam chamber decalcify the steam iron following the user instructions. 1. Fill the water tank to the maximum with tap water 2. Set the steam iron to maximumtemperaturesetting and stand upright.Waituntil it hasreachedmaximumtemperature. 3. Unplug the steam iron from the power outlet. Caution: Hot water and steam will come out from the sole plate when the steam regulator is turned clockwise beyond setting. 4. Hold the steam iron in horizontal position over a sink. Turn the steam regulator clockwise above maximum to ""anti calc"". The button will release the complete capacity of water from the tank and will rinse the water through the heating block of the iron. Scale and other residues will be released out of the soleplate. 5. Please repeat the procedure up to 3 times if necessary 6. Place the released steam regulator in citrus acid or clear vinegar. Remove any scale deposits and residues from the steam regulator with tap water. Put it back in its position. After cleaning re&#64257;ll the tank with water, heat up the iron and press the precision shot button 4 times to rinse the iron before ironing. Do not use commercial descalers - they may damage the iron.

Question 6

How does the auto-off function work?

Accepted Answer

The auto-off system enables maximum safety and saves energy. It shuts off after 8 minutes in the vertical position or 30 seconds in horizontal position.Once the iron is moved out of thevertical/ horizontal positionitwillstartto heat upagain.

Question 7

How long is the power cord on the iron?

Accepted Answer

This varies according to the model.TexStyle 7 models have a 2.5m power cord, and the TexStyle 3 models have a 2m power cord.

Question 8

How quickly will the iron be ready to use?

Accepted Answer

It depends on the temperature settings and type of iron.Most Braun irons will be ready to use within a minute and half on the highest temperature setting, after connecting it to a powersource.

Question 9

Is the wattage important for the performance?

Accepted Answer

The wattage influences the performance to a certain extent. Braun steam irons are optimised for moderate energy usage at a top performance level for perfect ironing results.

Question 10

My iron is not steaming – what can I do to resolve this?

Accepted Answer

The temperature setting may be too low.Steam regulator is set to 0The heating block might be calcified. Please see instructions for cleaning and decalcification.

Question 11

Sometimes I hear a ‘click’ sound from the iron, what does it mean?

Accepted Answer

The soft click sound probably comes from the working thermostat on your temperature settings.

Question 12

Sometimes water leaks out of the iron plate during ironing. What should I do?

Accepted Answer

Braun steam irons have a special coating inside the heating block that makes the outstanding steam performance possible, avoiding water leaking out of the soleplate during ironing. If water does come out the soleplate, please check the temperature setting as it may be set too low. In that case, either increase temperature or reduce the steam rate.

Question 13

What are the benefits of the Eloxal Soleplate?

Accepted Answer

Eloxal soleplates are very scratch resistant with perfect glidability.Even though it is very unlikely scratches on Braun soleplates will appear, small and thin scratches won't impact the ironingresult.

Question 14

What are the textile and Soft Textile Protectors?

Accepted Answer

These are attachments for your steam iron.They allow you to iron even the most delicate garments even on high temperature settings with full steam performance. They are easy to plug orunplugfrom yourBraun steam iron whileironingdifferentfabrics.Formoreinformationvisit our website.

Question 15

What does steam shot/ steam boost mean?

Accepted Answer

The steam shot will deliver concentrated steam in a short time, ideal when removing deep creases.

Question 16

What does the light on my iron mean?

Accepted Answer

A constant light means that the iron is heating up, when it switches off your temperature setting is achieved. The flashing light indicates the stand-by mode of the auto-off function.

Question 17

What happens if scratches appear on the soleplate?

Accepted Answer

Even though it is very unlikely to have scratches on Braun soleplates, small and thin scratches won't impact the ironing result.

Question 18

What is the difference between a steam iron and a steam generator?

Accepted Answer

An ironing system has a larger water tank and higher steam rate in comparison to a steam iron. It is designed for people who iron in bulk batches. A steam iron is more compact and easyto store.

Question 19

What is the function of precision shot button?

Accepted Answer

The precision shot button is available on Braun TexStyle 7 irons.It allows you to remove difficult to reach creases, as the steam comes out directly from the tip area of the soleplate.

Question 20

What is variable steam?

Accepted Answer

Variable steam is the constant steam rate which can be adjusted by the steam regulator.The full performance of the steam is available at all temperature settings above level 2.The temperatureselectorindicatesthiswitha steam icon.

Question 21

What is vertical steam?

Accepted Answer

This describes the usage of the steam iron in a vertical position. You can treat fabrics like curtains with steam to remove wrinkles whilst they are still hanging.

Question 22

What type of water should I use in my Braun iron?

Accepted Answer

Your Braun iron should be used with tap water. In the case of high calcium content water we suggest using demineralised water diluted with 50% with tap water. Never use demineralised/ distilled water on its own.Do not use chemical substances or detergents (e.g. scentedwater, essences, decalcifying solutions, etc.). For further details please consult the product user manual.

Question 23

What’s the best way to store my steam iron after use?

Accepted Answer

Empty the water tank; place the iron in a vertical position on a dry, safe spot.We recommend the tank is emptied for hygiene reasons and to avoid particle build-up within the tank.

Question 24

When do I need to descale the steam chamber of the iron?

Accepted Answer

When you've cleaned the anticalc valve and scale particles still come out of the soleplate the steam chamber should be descaled.

Question 25

When should I use the water spray?

Accepted Answer

The water spray is recommended for very deep or stubborn creases.Spray water directly on the fabric to remove these creases.

Question 26

Which specifications are important when choosing a steam iron?

Accepted Answer

When purchasing an iron consider the following:- Quality of the soleplate (for example: Glide ability/ scratch resistance/ durability)- Availability of variable steam- Inclusion of a steam precisiontip-User friendliness (for example:Open handle/easyrefill/longpower cord)- The reliability associated with the brand name- Wattage

Question 27

Why should I consider the Saphir soleplate?

Accepted Answer

The Saphir soleplate is Braun's highest scratch resistant soleplate with optimal glidability.Even though it is very unlikely scratches on Braun soleplates will appear, small and thin scratcheswon't impact theironing result.

Question 28

What is the advantage of a steam iron compared to a dry iron?

Accepted Answer

Using steam when ironing relaxes the fabric of the garment, making it easier to iron, and creases are removed more easily.

Question 29

What is the weight of Braun steam irons?

Accepted Answer

The weight can vary from model, below are some examples.Braun TexStyle 7: 1,4kgBraun TexStyle 5: 1,2kgBraun TexStyle 3 (TS320 C, TS330 C, TS340 C): 1,1kgBraun TexStyle 3 (TS345, TS355 A, TS365A, TS375A):1,2kg

Question 30

What should I do when the auto-off light keeps flashing and the iron is still in use?

Accepted Answer

Please contact the local Braun service center for repair.

Question 31

Where can I purchase the textile protector from?

Accepted Answer

The textile protector can be purchased from our website by clicking here.

Question 32

My CareStyle 1 doesn’t steam and the clean system led turns on with an acoustic signal. Why is this?

Accepted Answer

Braun\'s new CareStyle 1 models have a function that automatically activates a led and an acoustic signal when descale is required. The system will remind you to descale it regularly independent of the type of water used. Descaling can be performed at any time needed even when not indicated by the system. If the «clean» LED and the acoustic signal turn on during an ironing session, it is possible to continue ironing, but the steam function has been disabled until you have performed the cleaning process. There is no need to perform the cleaning immediately. The cleaning procedure can be performed when the ironing session has been finished or next time the appliance is switched on.How to perform the cleaning process:

Question 33

CareStyle 1 . How to set up your ironing system.

Accepted Answer

Watch this video to set up your CareStyle 1 and get it ready for ironing various fabrics and clothing.

Steam Irons